MATTRESS PADS & TOPPERS

Sleep Number® DualTemp Layer

Sleep Number ® DualTemp ™ Layer is rated 2.5273 out of 5 by 55.
Rated 1 out of 5 by from Great Idea - not quite ready for prime time My wife and I tried the Dual Temp for 3 weeks and it was very inconsistent in its performance. I had to wake up several times a night to "reset" the control.
Date published: 2016-01-13
Rated 1 out of 5 by from Too expensive for the quality! We've had the DualTemp for more than a year. Believe the reviews that warn you about the lumpy foam layer in this topper. The "swiss cheese" foam is thin and cheap. It rolls up and bunches even if you are not using an adjustable bed. It seems that if you do not sleep as still as a corpse the foam is going to bunch up every night. The foam is also very thin and "cheap", it doesn't cushion your body from lying on the rather stiff units that the air pumps through. We've only had this a little over a year and now my husbands remote won't work and just displays an ER, which is upsetting because he enjoyed the unit more than I do and loved to warm his side before snuggling in. This mattress topper is almost $2000 and the quality is not there for the price! The noise did not bother us but we are used to sleeping with an a/c unit running several months of the year. I think if Select Comfort found a thicker, firmer foam layer that they could "swiss cheese" and pad the unit with it would help a lot. They might also consider offering replacement pads (at a very reasonable price - since the customer has already shelled out an awful lot of money for this topper) since the pad not only lumps and shifts, it also seems to have stretched out and is not easy to adjust back into the unit after a short time. We probably should have returned it.
Date published: 2016-01-05
Rated 3 out of 5 by from Great concept, poor product testing! We have had our sleep number limited bed, with dual temp controls for over a year now. The temperature control is an amazing experience. I switch between hot and cold dependent on my mood, and it is wonderful for helping me stay asleep as I often over heat with out it. I leave it on anytime I am in the bed, because even if I have it on the lower heat setting the air circulation keeps me from sweating thru the sheets. Here is the bad news and why I say poor testing. The pad never stays put unless your bed does, I have to get out of my bed and adjust the pad anytime I want to adjust my bed firmness and head & feet height adjustments. Really frustrates me that my bed is meant to be adjustable and the pad prohibits it. There are straps that sit a foot or more from the top and bottom that are meant to hold it in place, wishful thinking. Maybe on a traditional non adjustable mattresses it might work. My solution was that my wife and I used spider line braided fishing line to see the top of the pad to the top of the mattress. Solved the slippage problem, but I am sure it voided my warranty. Next issues are the same as mentioned by other reviewers, the control system freaks out all the time, system disconnected........ Shut everything done, unplug and wipe off every plug, replug back in, restart system...........guess what? The problem hardly ever is resolved, so I just keep fighting the system and having to press the same temperature buttons 5 plus times to get it to adjust, and my remotes work great so it's a programming issue. The most irritating is the swiss cheesed foam pad inside that allows airflow through out. It is not attached to the sides so it shifts constantly, stretches and folds. Making it lumpy and requiring adjustments nightly, which basically entails remaking the bed nightly and dissembling the pad nightly. Like I said in the title, I think it is a great concept, but it seems obvious to me it was never fully tested with the bed models and different body sizes, as my wife's side has similar issues but takes a couple extra months to get there. My thought being a product that costs thousands of dollars should be built to last the duration of my beds lifespan. Hope this helps other buyers, and sleep number, as I am not saying to avoid this product, just hoping it worked like it was meant.........
Date published: 2015-12-23
Rated 3 out of 5 by from Very Lumpy We've had the dual temp in place for about a year or so. Every week we have to disassemble the topper and arrange the cooling/heating pads. they move around and make lumps in the bed.
Date published: 2015-11-10
Rated 1 out of 5 by from Sleep Number Dual Temp Layer I bought this because when I fall asleep I overheat. I borrowed the money to get it. Waste of money. The description of it does not tell the whole story. I turn it on it goes off, either before I fall asleep or during. It would be worth it if it stayed on or went on and off. Also it will go off for a refresh cycle but unless I tell it to cancel will stay in that cycle indefinitely so again it is not cooling. And my handheld control will also shut off for error code which is to say something is disconnected but it is not because i check everything and it stays in error and then poof goes back on. And each time it is off I overheat more sleeping on this hard pad not to mention now the foam for the cooling pad has stretched out so much it bunches under my back. And one reviewer said why can't sheets be made to accommodate the hose and the company said did not need it because it is at the bottom. No, it is at the top per instructions for adjustable beds. Good luck getting a fitted sheet on and don't expect it to stay on. And no my pad is not less than a month old.
Date published: 2015-11-10
Rated 4 out of 5 by from A better nights sleep Purchased cooling/heating pad over a month ago to help provide a cool nights sleep. I no longer wake up throwing covers off and on all night long. I still wake up but go right back to sleep. The system has provided me with a better nights rest. I do object that the system needs to refresh during the night, which turns off the cooling system. I wake-up having to hit continue on the remote control to get the cooling turned back on. The other issue is the power plug into the motor/control box. Any little movement the plug falls out. For the cost you would think the power plug would have been designed to lock into place. Overall I would recommend the cooling feature.
Date published: 2015-10-30
Rated 2 out of 5 by from Not worth it - randomly works right. We are in to the second night and the unit is already not working properly. The remotes will only operate one side (which, with a product called "dual" doesn't make any sense). If we unplug the units, whichever one we plug in first is the one the remotes will work. Reading through the trouble-shooting, the option is to lie under the bed and keep plugging and unplugging until they both connect! How often will I have to do this??? For $2000, it should work. The "Dual" aspect should be consistent. To be fair....when it works, it does blow good cool air and is great at warming up. Just wish it would work.
Date published: 2015-10-04
Rated 5 out of 5 by from Love my layer! I love the DualTemp layer. The cool temp meets my needs well. Now I don't have to use my fan to keep me cool at night.
Date published: 2015-09-03
  • 2016-02-05T07:58CST
  • bvseo_cps, prod_bvrr, vn_cps_3.1.6
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_55
  • loc_en_US, sid_dualTemp, PRD, sort_mostRecent
  • clientName_SelectComfort
Reviews

Price:$999.99 - $1999.99

SALE $999.99 - $1999.99

Reg. $999.99 - $1999.99

    Special Financing Available

    Product Features

    The revolutionary temperature balancing layer that can be added to any mattress brand or adjustable base. It’s a new degree of Sleep. 


    Dual-sided so each of you can set your ideal temperature. ActiveAir™ technology lets you heat or cool each side. The heating and cooling source maximizes airflow and minimizes noise for optimum performance. Evenly distributes temperature for head to toe comfort.



    • Fan Room-temperature air circulates underneath you. It may feel cool.
    • Heating/Cooling Use the up/down buttons to select from three levels of warmth or cooling
    • Enter your name to personalize your remote
    • Timer allows for automatic shut off in one to nine hours


    Sleep Number Mattress Size Guide

    Sleep Number® beds are available in standard industry sizes, and will fit into traditional frames and furniture sets.

    1.King (Eastern)/Split King 76" x 80"
    2.California King 72" x 84"
    3.Queen 60" x 80"
    4.Full/Double 54" x 75"
    5.Twin 38" x 75"
    6.Twin Extra-Long 38" x 80"

    Measurements are provided in inches.

    1-4 feature dual adjustability
    3-6 are available with a single chamber


    Product Reviews

    Product Reviews

    Product Q&A

    Product Q&A

    YOU'LL ONLY FIND SLEEP NUMBER AT A SLEEP NUMBER STORE

    Feel, see and hear the difference.

    FIND A STORE